Diamond Point International
 
Aitech Defense Systems

Aitech P220

6U VME64x Power Supply Board

250 Watt Output VME64x PSU

 
Aitech P220
 
  • 250 Watt Output VME64x PSU
  • 18 - 36 Volt DC Input Range
  • 28Vdc Input Power Source per MIL-STD-1275 and MIL-STD-704
  • Outputs:
    • 250W of 5 V
    • 60W of 3.3V
    • +/-12 V @ 1.0 A each
    • 3.3V @ 11 A
  • Input/Output and Chassis Isolation
  • Thermal Shutdown



Datasheet/Manual:

Aitech P220 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The P220 is a high quality VME board featuring DC to DC converter modules used to provide the isolated outputs with a power rating of up to 250 W. High reliability MOSFET technology in the output stage results in high-current, high-efficiency capability. Integral line filters are used to reduce the power supply switching noise in the inputs. The inputs and the outputs of the P220 are fully isolated to eliminate any possibility of ground loops. Input voltage may vary from 18 to 36 VDC. Outputs are protected against short circuit and over-voltage.

 
 

Specification

Features:
  • 250 Watt Output VME64x Power Supply
  • 18 - 36 Volt DC Input Range
  • 28Vdc Input Power Source per MIL-STD-1275 and MIL-STD-704
  • Input Transient and Reverse Polarity Protection
  • Integral EMI/RFI Input Filter
  • Outputs:
    • 250W of 5 V
    • 60W of 3.3V, and +/-12 V
    • Four reference voltage outputs
    • (+2.0, +5.0, +/-10.0 Vdc)
  • Output Over-Voltage and Short-Circuit Protection
  • ACFAIL Output Signal with 4 ms Holdup Time
  • Input/Output and Chassis Isolation
  • Thermal Shutdown
  • Fan Control Circuit
ROHS Status: This product's status is to be confirmed

Ordering Details:
Board: Call for details
Accessories: Call for details
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.

 
© 2008 Diamond Point International. All rights reserved.