Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Aitech E118 - Single VME Slot Enclosure

Compact and Lightweight Environmentally Sealed Chassis with 1 Standard VME64 Slot

Introduction

The Aitech E118 convection-cooled Single Slot VME computer enclosure is built to be rugged and reliable as well as lightweight and compact. EMI/RFI protected and environmentally sealed, the E118 is capable of withstanding extreme environmental conditions of altitude, temperature, humidity, shock, vibration, EMI and chemical exposure. This makes it ideal for use in all military environments.

Sturdy Mechanical Design

The E118 is constructed of durable CNC machined 6061-T6 aluminum. Fasteners are stainless steel and often-used threads have selflocking stainless steel helicoils to withstand severe vibration and shock. All connectors are
located on one side of the enclosure for easy access. Sides and top walls are externally finned for radiation and convection cooling. The bottom plate is smooth and flat for optional conduction cooling to cold plate. The E118 is available in a shock-mounted configuration with two vibration helical wire rope type isolators to enhance vibration and shock survivability of the enclosure and its payload. There are two options to assemble the shock mounts:

  • Bottom assembly - suitable for applications with width limitations
  • Side assembly - suitable for applications with height limitations

Also available are mounting brackets for hard mounted configuration suitable for cold plate applications. 

Board Capacity

The E118 accommodates one standard IEEE 1101.2 conduction-cooled VME card.

Specification

Enclosure Specifications

GeneralRugged/Mil Chassis for Mobile Military Applications
Designed for Harsh Mechanical, Climatic, Chemical and Electrical Stresses
Environmentally Sealed
Compact and Lightweight with a Single VME Slot
Internally Conduction-cooled; Externally Convection- and Radiation-cooled
Optional Wire Rope Vibration Isolators with Two (2) Mounting Configurations
Optional Cold Plate Conduction-cooling
Fully Sealed Faraday Cage and Complete EMI/RFI Power Line Filtering
Customized I/O Harnessing and Front Panel
Multi-output Integral 28 VDC Input VME Power Supply
Customized Card Access Panel
Optional PCMCIA Card Access Door
CapacityThe E118 accommodates one standard IEEE 1101.2 conduction-cooled VME card
PSUVoltage Range (DC): 18 V to 36 V
Nominal Input Voltage: 24 V to 28V
Transient Suppression: Meets requirements of:
– MIL-STD-1275AT (except ignition, cranking and single fault conditions)
– MIL-STD-704D
Output: +5v @ 12A, +3.3V @ 11A, +12V @ 2A, -12V @ 2A
Total Output Power: 160 W
Efficiency: >75%
CoolingThe E118 does not require forced air cooling. Heat is conducted through the aluminum sidewalls and radiated/convected to the surroundings by means of the external vertical fins on the sides and top walls of the enclosure. The enclosure can also be base mounted to a cold plate, thus enhancing the thermal path by adding conduction cooling through the baseplate in addition to radiation and natural convection.
IP/NMEAThe E118 is sealed against humidity and splash. Enclosure mating surfaces are sealed with hollow silicon rubber O-ring seals. Connectors and other accessories are protected a similar manner.

General

ExpansionVME64 compliant
ElectricalSee above for PSU specification
Power Dissipation Capability: More than 30W at 71C ambient air temperature (maximum delta T of 15C at card edge).
MechanicalThe net dimensions of the enclosure including connectors, but not including vibration isolators or mounting bracket are:
10" x 9.5" x 2.6" (W x D x H)
Temperature-46C to +71C
Humidity5%-95% relative humidity with condensation
WeightLess than 10 lbs. (without board)
VibrationSine Cycling of 10 G (max) at5 to 500 Hz
Random 16 Grms at 20 to 2000 Hz
Transportation* Loose cargo vibration
* Hard mounted
ShockSingle half-sine shocks:
• 40 G peak
• 11 ms duration
• 3 axes
EMCDesigned to meet the emanation and susceptibility limits of MIL-STD-461, as per MILSTD- 462 requirements, CE102, CS101, CS114, & RE102.
Warranty1 Year
RoHSCompliant

Ordering Details

BoardRefer to datasheet for ordering part number scheme
AccessoriesN/A