The CPS3-SVE-250AC provides all basic features to run a CompactPCI® Serial system. Several protection and regulation options, basic monitoring functions, and its hold-up time make the power supply a reliable system component. It provides +12V output and +5V standby, and therefore is not intended for use in classic CompactPCI® systems. The product meets EMI EN55022 Class B, a must for many applications. High effi ciency and low standby input power is energy-saving and makes system cooling easier. Its wide input range of 85-264 VAC, and its operating temperature range of -25°C up to 70°C, even fanless with convection cooling, show how flexibly this power supply can be deployed.
Whenever some advanced features like hot-plug, redundancy, and PMBUS support are not required, and cost saving is more important, CPS-SVE-250AC is the right choice for CompactPCI® Serial systems.
The power supply is horizontally mounted into a cartridge to enable convection cooling. A guide rail and a backplane connection cable is included. The article is non-pluggable and comes as integrated part of a standard card cage. For integration into an alternative, custom selected enclosure and backplane, the power supply shall be combined with Kontron’s "AC Input Kit and Integration Service" CP-MKIT-AC-IN.
|Input||AC Input Voltage: 85 - 264 VAC (300VAC for 5s)|
Imput Frequency: 47 - 63 Hz
DC Input Voltage: 120 - 373 VDC
Inrush Current (cold start): 20A at 115 VAC, 40A at 230 VAC
Power Factor: Meets EN61000-3-2 (Typical PF 0.98/0.95 at 115/230VAC) Class A, Class C> 25% Load
Input Current: 3.0 / 1.4 A (at 115/230VAC)
Leakage Current (Typ): 0.75mA at 230VAC
Standby Input Power: <0.5W when remote off and 5V Aux supply at no load
|Output(s)||Output Power: 250 W max. Linear derating from 50°C to 50% power at 70C (see graph in datasheet)|
Output Voltage: 12V
Auxiliary Supply: 5V/0.3A
Hold Up Time: 16 ms
Temperature: Coefficient <0.02%/°C
Adjustment Range: 10.8V - 13.2V
Output Current: 21A max.
Load Regulation: 96mV
Line Regulation: 48mV
|Efficiency||92% (for 230 VAC)|
|Other||Over-current Protection: >105% rated output power or >101% of peak output power|
Over-voltage Protection: 13.8 - 16.2V (recycle AC, or use remote on/off to reset)
Over-temperature Protect: Yes (recycle AC, or use remote on/off to reset)
Remote Sense: No
Remote On/Off: Active Low
Monitoring Signal: DC OK, open collector signal, High on Fail (Active Low)
|Mechanical||Dimensions: 3U, 24HP, 225 x 122 x 128,7 mm|
Front panel size: 122 x 128,7 mm
System connection: Cable to backplane (included), screw terminals for AC input
Mounting: Non-pluggable, integrated part of a card cage
|Temperature||Temperature range (operation): -25 to +70°C (refer to datasheet for derating curve)|
Temperature range (storage): -30 to +85°C
Guaranteed Start: Up at -40°C
|Humidity||Operating Humidity: 30 - 90% RH (non condensing)|
Storage Humidity: 10 - 95% RH (non condensing)
|Vibration||10 - 55Hz: 19.6m/s2 Constant sweep 1 min X, Y, Z for 1 hour each (non operating)|
|Shock||Shock (in package): < 196.1 m/s2 (20G)|
|Safety/Certification||UL60950-1, CSA C22.2 No.60950-1-07 (2nd Edition), EN60950-1, IEC60950-1 (2nd Edition), CE|
|EMC||Withstand Voltage: Input to FG 1.5kVAC (20mA), Input to Output 3kVAC (20mA), output to FG 500VAC (100mA) for 1 min|
Isolation Resistance: >100M? at 25°C & 70%RH
Immunity: Built to meet EN61000-4-2 (Level 2,3), -3 (Level 3), -4 (Level 3), -5 (Level 4), -6 (Level 3), -8 (Level 4), -11
Conducted & Radiated EMI: Built to meet EN55022-B, CISPR22-B
Power Supply for CompactPCI-Serial. 250W, 85-240 VAC, 3U 24HP. Nominal voltage/max current: +12V/21A, Standby +5V/0.3A.
Operating temperature -25°C to 70°C, startup from -40°C, linear derating from 50°C. Hold-up time 16 ms.
Non-pluggable. Cartridge with guide rail and backplane connecting cable.