Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com
Manufacturer: Kontron
Kontron's CP3005-SA is the perfect choice for high-performance applications, with an improved performance-per-watt compared to predecessors. The single-slot master CPU cards are based on 8th Gen. Intel® Core™ i5 and i7, Intel’s newest refresh of the 14-nanometer technology with up to 6 cores. Combined with Intel® UHD Graphics P630, It provides a new level of graphics performance compared to previous platform designs.
CP3005-SA, when assembled with the 8th Gen. Xeon® E processor, is selected for typical server applications and whenever error-correcting code (ECC) memory is a must. CP3005-SA is built to be used in demanding and harsh environments. It is designed for VITA47 EAC3 and a temperature range of -40°C up to +70°C. The processor’s TDP can be adjusted dynamically to a desired performance and power envelope.
The maturity and future-openness of the CompactPCI form factor is proven in all ECT markets. Typical applications can be found in:
10 years lifetime of CP3005-SA or even more, and Kontron’s commitment to a rich CompactPCI portfolio, make CP3005-SA a safe investment with low total-cost-of-ownership.
CPU | |
| CPU Spec | 8th Generation Intel® processor (14nm technology): • Intel® Xeon® E-2176M, 6-Core, 2.7 GHz (base), 4.4 GHz (max),with ECC, 12 MByte Cache • Intel® Core™ i5-8400H, 4-Core, GHz (max),no ECC, 8 MByte Cache • Others may be follow |
| Chipset | Integrated PCH Mobile Intel® QM370 Platform Controller Hub (Core branded CPU’s) Mobile Intel® CM246 Platform Controller Hub (Xeon branded CPU’s) |
| Memory | Up to 32 GByte dual channel DDR4 SDRAM running at 4003 MT/s Via two SODIMM sockets ECC with Xeon variants only |
| Graphics | Intel® UHD Graphics P630 integrated • up to 3x independent graphics outputs • Supports DirectX® 12 and OpenGL 4.5 Maximum resolutions • VGA with a CRT monitor: tbd • VGA with a LCD monitor: tbd • DisplayPort: 4096 x 2304 pixels @ 60 Hz |
| Network | Intel® i210 and i219LM Ethernet controller: Up to three 1000BASE-T interfaces, two front/rear switchable with WOL (Wake-on-LAN), third available via 8HP extension CP3005-HDD LAN boot support |
| Storage | M.2 SSD socket for 2242 M.2 SATA modules, enabling 32 GByte up to 512 GByte Onboard 2.5” SATA SSD/HDD installation on 8HP variants via CP3005-HDD extension Onboard CFast installation via 8HP extension |
| Serial | dual UART, EXAR XR16L2750 |
| Front I/O | 1x VGA-CRT 15-pin D-Sub connector 2x USB 2.0 ports, 4-pin standard USB connectors 2x RJ-45 with integrated LEDs (ACT, SPEED) 6x LEDs: 4x POST Code or General Purpose, WD, TH |
| Rear I/O | Rear I/O via J2: • 2x SATA 3Gb/s ports • 2x Gigabit Ethernet ports without LED signals • 2x USB 2.0 channels • 1x VGA analogue port • 2x COM port RS-232 (LVTTL signal level) • 5x GPIs and 2 GPOs (LVTTL signal level) • Reset and power management signals |
| Common | Watchdog: FPGA-based, timeout ranging from 125ms to 4096s programmable in 16 steps, IRQ, reset, dual-stage configuration WIBU: WIBU CodeMeter ASIC 1504-03 for Kontron APPROTECT |
| BIOS | AMI uEFI, setup console redirection to serial port (VT100 mode) with CMOS setup access, EFI Shell support, board configuration via Shell, diskless, keyboardless, videoless operation |
| Platform | Infineon SLB9670 TPM 2.0 controller |
General | |
| Expansion | PICMG 1.0 Rev 3.0 compatible, 32-bit/33MHz (66MHz on request), rear I/O version via J2 Universal 5V and 3.3V PCI signalling voltage supported, 7 Req/Gnt & clock lines Operating in system slot as system master and in peripheral slot in PCI passive mode CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 Rev. 2.0 |
| Electrical | CP3005-SA with Xeon® E-2176M: typ. W tbd CP3005-SA with Core™ i5-8400H: typ.W tbd |
| Mechanical | 3U 4HP/8HP/12HP CompactPCI, 100 x 160 mm |
| Software | Linux Fedora 21 Windows, VxWorks on request |
| Temperature | Operating temperature: • 0 to +60°C, standard • -40 to +70°C, extended temp. Storage temperature: • -40 to +85°C (without additional components) |
| Humidity | 93 % RH at 40°C, non-condensing (acc. to IEC 60068-2-78) |
| Weight | 320 g (CP3005-SA 4HP) |
| Safety/Certification | UL 60950-1, CSA 22.2 No 60950, EN 60950-1, IEC 60950-1 |
| EMC | EN 55022 Class B / EN 55024 |
| Warranty | 2 Years |
| RoHS | Compliant |
Ordering Details | |
| Board | CP3005-SA-2.5Q-8-8F-T CP3005-SA Quad Core i5, 8 GByte, 8HP, Front IO only, CP3005-HDD Mezzanine, TPM CP3005-SA-2.5Q-16-4R-T CP3005-SA Quad Core i5, 16 GByte, 4HP, with Rear IO, TPM CP3005-SA-2.7S-32-4R-T CP3005-SA Six Core Xeon E, 32 GByte, 4HP, with Rear IO, TPME |
| Accessories | N/A |
