Call us: +44 (0)1634 300900 | E-mail:

Diamond Point International

MEN Mikro 0701-0046 - CPCI Tabletop/Wall-Mount Enclosure, 3 Slots, 3U Cards Vertical

19" Desktop or Wall-Mountable 4U / 24 HP System

MEN Mikro 0701-0046 - 3U cPCI 3 Slot Enclosure
Key Features
3U CompactPCI® 3 slot enclosure
19" desktop or wall-mountable
IEEE 1101.10/11 compliance
4U / 24 HP system (incl. 1U fan tray
3U cards vertical, 3-slot 3U backplane
System slot right
Space for 8 HP power supply


MEN Mikro's 0701-0046 is a ultra-small CompactPCI® system can either be used as a desktop device, being equipped with support feet. Or it can be mounted on a wall by using the separate angular supports that are part of the package. The power supply is located on the bottom of the system (power cable included). The 4U / 24 HP unit comprises an 1U fan tray with a low-noise fan at the bottom.

The 32-bit/33 MHz backplane has three vertical slots for 3U Eurocards, with the system slot located on the right. Additional space on the right of the CPU board in the system slot allows to install an I/O side card connected to the CPU board within 8 HP width.

The two slots on the left side of the CPU board are free for peripheral slot cards, for example for boards with communication functions (UARTs, Ethernet, WLAN, GSM, GPS) or for mezzanine carrier boards (M-Modules, PMCs, PC-Cards, Express Cards, PCI Express® Mini Cards).

Depending on the configuration requirements different types of power supplies may be needed. This system offers an 8 HP space on the left for pluggable 19 power supplies with a P47 connector. The PSU recommended for this system delivers 250 W, with a quad supply and 5 V max./40 A, as well as wide range input between 90 and 264 VAC.

The system meets EMC requirements, making it a perfect choice for embedded applications in rough environments.

Ask us for completely configured, wired and tested systems!


Enclosure Specifications

GeneralCompliance with IEC 60 297-3, IEEE 1101.10
Additional space right of the system slot for a side card connected to the CPU board
Capacity3 slots for 3U Eurocard boards
2 slots for 3U 8HP PSU
MechanicalDesktop or wall-mounted (19" angular supports included in package)
Fold-out support feet for desktop operation
3U card vertical
Dimensions: 4U, 24HP, 235mm depth
Weight: 2.2kg (empty rack without boards)
3.3V V(I/O)
CompactPCI® system slot on the right
Two CompactPCI® peripheral slots
PSUPSU not included
3U slot with P47 power connector for 8HP PSU
Power input at the back at the bottom of the system (cable included)
Power switch at the front
CoolingOne horizontal fan tray
• 12V
• Air flow volume 95 m³/h (manufacturer's data)
• Dimensions 119 x 119 x 32 mm
• Sound power level 4.3 Bel
• Ventilation direction from the bottom to the top


ExpansionCompactPCI® Bus
• Compliance with CompactPCI® Specification 2.0 R2.1
• DECchip 21150 PCI-to-PCI bridge
• • Target and/or initiator on PCI bus
• • Max. clock frequency 33MHz
• • Power supply 5V and 3.3V
• Compliance with PCI Specification 2.1
• 32-bit PCI data bus
• V(I/O): +3.3V or +5V (Universal Board)
ElectricalN/A - depends on CPU and PSU
Mechanical4U, 24HP, 235mm depth
TemperatureTemperature range (operation):
• Up to -20..75°C (dependent on system configuration)
Temperature range (storage):
• -40..+85°C
HumidityRelative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
Weight2.2kg (empty rack without boards)
Vibration(sinusoidal): 2g/10..150Hz
EMCTested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Warranty2 Years

Ordering Details

CompactPCI® 19" 4U/24HP desktop system for 3U cards, 3-slot 3U CompactPCI® backplane, system slot right, 1U fan tray with 1 fan, 8 HP space for 1 pluggable PSU
Plug-in PSU 19", 3U, 8 HP, quad 250 W, 5 V max. / 40 A, wide-range input 90-264 V AC, P47 connector, -25 to +50°C

Filler panel 3U/4HP, IEEE1101, textile gasket

Filler panel 3U/8HP, EMC gasket, fully pre-mounted

Filler panel 3U/12HP, EMC gasket, fully pre-mounted