Call us: +44 (0)1634 300900 | E-mail:

Diamond Point International

Kontrons COMe-cP2020 - QorIQ™ Power Architecture® Computer-on-Modules

Freescale™ Power Architecture® COM for Deeply Embedded Number Crunching Systems


The Kontron COMe-cP2020 which is mechanically compatible with the COM Express® compact (95 mm x 95 mm) specification is based on the Freescale™ QorIQ™ P2020 dual-core Power Architecture® with 1.2 GHz. For deployment in the industrial temperature range of -40 to +70 °C there is also a version available with 1.0 GHz clock rate.

The Power Architecture® COMe-cP2020 Computer-on-Module meet the requirements for variety markets and applications:

  • In the transport sector for deployment in vehicle control or event-recording units
  • In the energy sector in performance measurement systems
  • In industrial applications like PLCs or closed-loop controls for synchronous motors or turbines
  • In enterprise network and telecommunication appliances, for example, in switches, WLAN access points or Long Term Evolution (LTE)- and WiMax channel card applications.



CPU SpecFreescale™ QorIQ™ P2020 e500 Power Architecture®
2x 1.2 GHz commercial temp
2x 1.0 GHz industrial temp
32 KB L1 instruction cache and 32 KB L1 data cache for each core; 512 KB L2 cache with ECC
MemoryUp to 4GB DDR3-667 72-bit
Network3x 10/100/1000 Base-T
Storage64kbit I²C EEPROM / up to 2GB NAND Flash + 2MB NOR Flash
2nd 2MB SPI NOR Flash for boot recovery purposes
512kB MRAM
MicroSD card slot / bootable
Expansion4x SerDes up to 3.125 Gbps multiplexed across controllers can be configured as: PCIexpress, sRIO, GbE; Example:
1x PCIe x4
2x PCIe x1 + 1PCIe x2 2.5 Gbps
1x PCIe x2 + 2x 1GbE SGMII
2x SRIO x1 2.5Gbps + 2x GbE SGMII
2x SRIO x1 3.125 Gbps
1x SRIO x4 with 1.25/2.5 or 3.125 Gbps
USB4x USB 2.0
Serial2x UART
2x GPIO (exclusive with SDHC usage); additional GPIO on project base
2x I²C
2x IEEE 1588 control
Watchdog, JTAG debug, Real time clock; LEDs
1x SDHC; 1x MDIO (IEEE 802.3 clause 22); 5x IRQ; 1x IRQ OUT; 16 bit eLBC (2 Devices); Processor Local Bus
Bootloader: U-Boot


Electrical12 V +/- 5% (optional RTC supply voltage of 3.3V)
Est. 12W/12V
Mechanical95 x 95mm
CAD drawings on request
Conformal CoatingUpon request, MOQ applies
SoftwareLinux; Wind River VxWorks 6.9.2
TemperatureOperation (standard): 0° to 60°C
Storage: (standard): -30° to 85°C
Operation (industrial): -40°C to 70°C
Storage: (industrial): -40°C to 70°C
HumidityOperation: 10% to 90%, storage: 5% to 95% (non condensing)
Warranty2 Years
Availability:Last time buy date: 31 August 2016

Ordering Details

COMe-cP2020c COM Express® basic, Freescale™ QorIQ™ P2020 2x1.2GHz, 2GB DDR3-667 ECC, 1GB NAND Flash, 0° to +60°C

COMe-cP2020i COM Express® basic, Freescale™ QorIQ™ P2020 2x1.0GHz, 2GB DDR3-667 ECC, 1GB NAND Flash, -40° to +70°C

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories68100-0000-00-S Starterkit for QorIQ™ based Com Express® COM, incl. COMe Eval Carrier QorIQ™, Adapater cards for SRIO (ADA-Eval-QorIQ-SRIO)/SGMII (ADA-Eval-QorIQ-SGMII)/SFP+XAUI (ADA-Eval-QorIQ-XAUI), Mounting Kit, Power supply, Documentation

68100-0000-00-0 COMe Eval Carrier QorIQ™ - Micro-ATX form factor

1053-8484 Linux BSP for COMe-cP2020 modules
1053-8352 VxWorks 6.9.2 BSP for COMe-cP2020 modules

38110-0072-05-0 COM Express® Connector Baseboard 5mm 2x220 pin 72 pcs
38110-0054-08-0 COM Express® Connector Baseboard 5mm 2x220 pin 54 pcs

Need storage - try Innodisk SSD