Call us: +44 (0)1634 300900 | E-mail:

Diamond Point International

Contec FXA2000-G - Industrial Wireless LAN Access Point for IEEE 802.11n/a/b/g

2.4 GHz and 5 GHz bands, access point/station/repeater modes, 0°C to +40°C Operating


Contec's FXA2000-G is an access point that conforms to IEEE 802.11n/a/b/g wireless networking standards and supports a wide range of input power (5 to 30 VDC) and PoE. FXA2000-G's lightweight and compact design enables a smart installation with included magnets and tapping screws. FXA2000-G is configurable to both be an access point and station. This product can be used as a Wireless LAN converter for wired LAN device (bridge)s. This product is provided with a connector protection cover and a security slot for theft proof.

FXA2000-G supports 24 channel operation (W52/W53/W56/W58*1) in the 5 GHz (IEEE802.11n/a) range, and in the 2.4 GHz (IEEE802.11n/g), you can choose from channels 1 to 13ch. So, it is possible to design a flexible wireless network to compensate for external interference.

FXA2000-G supports three modes of operation:

  1. Access Point - The device serves as a base station for client devices to connect to under the access point. The unit supports up to four virtual access points
  2. StationThe device serves as a client device (slave station) to connect to a station access point. This effectively turns the unit into a wireless bridge - any Ethernet devices connected to the RJ-45 port will be connected to the upstream access point.
  3. Repeater - The device operates simultaneously as a repeater access point and a station and it serves as a repeater (only one access point is supported in this mode)


Main Specification

FunctionStation / Access Point / Repeater

Wireless LAN:
• IEEE802.11n, IEEE802.11a, IEEE802.11b, IEEE802.11g
• 2.4GHz and 5GHz operation
• IEEE802.11n security: WPA(AES), WPA2(AES), WPA-PSK(AES), WPA2-PSK(AES), WSL
• IEEE802.11a/b/g security: WEP(open/ Shared Key /Auto), WPA(AES, TKIP), WPA-PSK(AES,TKIP), WPA2(AES, TKIP), WPA2-PSK(AES,TKIP), IEEE802.1X(EAP-TLS, PEAP), WSL(

• IEEE802.3(10BASE-T), IEEE802.3u(100BASE-TX)
• 10/100Mbps Half Duplex/Full Duplex
Connection(s)Antenna: Two integrated MIMO antennas
Ethernet: Standard RJ-45 interface


ElectricalInput voltage range: 5VDC±5% (DC Jack), 5 - 30VDC±5% (power connector), 24VDC±10% (PoE)
Rating input current: 1.05A (5VDC input), 0.19A (30VDC input) (Max.), 0.24A (PoE input 24V)
Note: Unit must not be powered via DC connector and PoE at the same time.
MechanicalUnit only: 136.2(W) x 100.0(D) 31.0(H) mm including including power cable prevention hook
With connector cover attached: 170.0(W) x 100.0(D) x 170.0(W) x 31.0(H) mm
TemperatureTemperature range (operation) : 0 to 40°C
Humidity10 - 90%RH (No condensation)
Weight250g (unit only), 270g (with connector cover attached)
Safety/CertificationCE. FCC, VCCI, UL. KCC, NCC, SRRC, IDA
Warranty2 Years

Ordering Details

Small Embedded Wireless LAN access point for IEEE802.11n/a/b/g