µQBoard EX is based on the DMP’s Vortex 86EX SoC. It supplements the product range of x86 COMs in the lower requirement spectrum with a power consumption of approx. 2 Watt. It’s the perfect alternative to ARM microcontroller based modules, where low power at low performance meets the x86 architecture and the requirement for a cost efficient design.
The µQseven form factor offers standardized small form factor system solutions based on an established standard with a long term scalability in the application. This module offers a wide spectrum of interfaces fitting industrial applications.
Typical applications for µQBoard EX are Smart Nodes, data loggers, small control units with CAN-Interface or outdoor applications with harsh environmental requirements. The unique possibility using x86 architecture on this form factor allows the use of a wide spectrum of standardized software, like OS, drivers for peripheral components and existing applications. In the fast moving x86 world the 86EX SoC of DMP is an exception with a total availability of >7 years. Due to the long term availability this module fits the corresponding products with longer life cycles.
|CPU Spec||DMP Vortex86EX 32-Bit x86 SoC @300MHz|
16 KB I/D L1 Cache, 128 KB L2 Cache
|Memory||256 MByte DDR3 on board @ 300MHz|
|Network||1x Fast Ethernet IEEE 802.3u 100 Base-T|
|Storage||microSD socket or 512MB SLC via eMMC|
|Expansion||1x PCIe Lane ( x1)|
|USB||1x USB 1.1 Client / 2x USB 2.0 Host (OHCI / EHCI 1.0)|
|Serial||Feature connector: 16 GPIO or 2 UARTS|
Qseven: 1 UART
SPI: 1x (2x /CS)
GPIO: 8 GPIOs (via Qseven connector)
CAN: 1x CAN2.0A/2.0B
Option: PS/2, additional 4x COM
|Electrical||Power consumption: around 2 Watts|
|Mechanical||40 x 70 x 6 mm|
|Software||Windows CE 6.0 R3 / Linux|
|Temperature||Operation: -40°C to +85°C|
Storage: -40°C to 85°C
|Humidity||Operation: 10% to 90%, storage: 5% to 95% (non condensing)|
|Board||B13551-QBM-001-0001 Vortex 86 EX SoC @ 300MHz, 256MB DDR3 RAM, µSD, -40°C to +85°C|
B13551-QBM-001-0002 Vortex 86 EX SoC @ 300MHz, 256MB DDR3 RAM, 512MB eMMC (SLC), -40°C to +85°C
Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
|Accessories||B13751-QBM-001-0001 Evaluation Board for QBoard DX2 / QBoard EX|