Call us: +44 (0)1634 300900 | E-mail:

Diamond Point International

Contec CPS-MC341-A1-111 - Analog Input and Output Wired LAN CONPROSYS Model

Built-in high-performance firmware, cloud-compatible remote I / O unit


Contec's CPS-MC341-A1-111 is an M2M controller from their CONPROSYS range with analog input and output. It contains 8 channels of high precision analog input and 2 channels of output with 16-bit solution each.

You can perform all processes from the development to the operation on a web browser. The functions such as Web monitoring of I/O information, alarm processing by I/O information, task divergence enable you to create a Cloud system at low cost and in a short time.

  • The product measures data with an external sensor and uploads them to the Cloud server.
  • The product contains a Web server (Java applet). Even with your PC located remotely, you can monitor and update I/O information through a Web browser. On the monitoring screen, you can freely lay out the standard GUI parts (graphic, slider, button, etc.). All operations including monitoring layout, making relations with I/O information, can be achieved via the Web browser.
  • You can combine and assemble icons such as arithmetic operations, conditional branching, data outputting to perform the executions or its processes like drawing them in the flowchart. All operations can be completed on the Web browser.
  • By working with the Ethernet device (TCP/UDP), you can establish up to 10 connections and transmit or receive messages. Message communication can be accomplished from Web task script.
  • Supplied with analog input (16-bit, 8 channels), and analog output (16-bit, 2 channels).
  • Compact design, 188.0(W) × 78.0(D) × 30.5(H), features flexibility in installation.
  • The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments.
  • Use the product as Ethernet Hub so that you can connect devices in the daisy-chain.


For more details on the software options for the CONPROSYS products, please refer to the CONPROSYS software page.



CPU SpecARM Cortex-A8 600MHz
MemoryOn Board 512MB DDR3 SDRAM
Dual RJ-45 interfaces
Realised as a dual port hub, so can be daisy chained
StorageOn-Board 32MB NOR Flash for OS
SD Card slot
OtherLED: Power (Green)/ Status 1 (Green) / Status2 (Red)
Switch: Reset SW, Shut Down SW
RTC: RTC built-in (battery not equipped)

Analog Inputs

Number Of Outputs8 single ended inputs
Resolution16 bits (1/65,536 of full scale)
RangeBipolar ±10V
Maximum Input VoltageAbsolute max. input voltage ±11V
Input Impedance1MOhm or more
Nonlinearity±15LSB (at 25°C)
OtherConnector: 2 piece 3.5mm pitch 10-pin Terminal
Applicable wire: AWG28 – 16

Analog Outputs

Number Of Outputs2 output channels (voltage output)
Resolution16 bits (1/65,536 of full scale)
Nonlinearity±15LSB (at 25°C)
OtherImpendance: 1 Ohm or less
Connector: 2- piece 3.5mm pitch 10-pin Terminal
Applicable wire: AWG28 - 16


ElectricalRated input voltage: 12 - 24VDC
Input voltage range: 10.8 - 30VDC
Power consumption: 12V 0.7A (Max.), 24V 0.4A (Max.)
Connector: 2- piece 3.5mm pitch 3-pin Terminal (V+, V-, FG)
Applicable wire: AWG28 - 16
Mechanical188.0(W)×78.0(D)×30.5(H) (not include projection)
Mounting: Quick mounting onto 35mm DIN or wall mountable with screws
SoftwareUnit based on Linux kernel 3.2 (closed system by default)
TemperatureTemperature range (operation): -20 to +60°C
Temperature range (storage): -20 to +60°C
HumidityHumidity (operation): 10 - 90%RH (No condensation)
Humidity (storage): 10 - 90%RH (No condensation)
Vibration10 - 57Hz / semi-amplitude vibration 0.15m, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions
(JIS C60068-2-6 compliant, IEC60068-2-6 compliant)
Shock15G half-sine shock for 11ms in X, Y, and Z directions JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Safety/CertificationFCC, VCCI
Warranty1 Year

Ordering Details

CONPROSYS Integrated Type with Analog I/O (16bit 8x AI, 16bit 8x AO)
12V output AC-DC Converter, 1.3A maximum current

24V output AC-DC Converter, 3.8A maximum current