Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Diamond Systems Jethro - I/O Rich carrier for NVidia Jetson

Compact Low-Cost Platform for Evaluation

Diamond Systems Jethro - I/O Rich carrier for NVidia Jetson
Key Features
NVidia Jetson TX2 / TX2i carrier
2x 4-channel CSI camera inputs
1x 10/100/1000 Ethernet, HDMI
3x USB, wide range voltage input
6x analog inputs, 2x analog outputs
1x miniPCIe, 1 M.2 (SSD), 1x microSD
-40 to +85°C temperature operation
Datasheet/Manual
No files available

Introduction

Jethro offers a compact, low-cost solution for the implementation of high-performance computing solutions based on the NVidia Jetson TX2/TX2i computer modules. Jethro provides access to most I/O features of the Jetson modules, including camera, Ethernet, USB, and serial. In addition, it features a unique data acquisition circuit with analogue input, analogue output, and digital I/O to enable Jethro to interface to the "real world" of analogue and digital sensors and controls.

All I/O on Jethro uses latching connectors for increased resistance to shock and vibration. This plus an operating temperature range of -40 to +85°C make Jethro an ideal choice for deploying Jetson computing technology in vehicle or outdoor environments.

Diamond provides a complete Linux BSP for Jethro with built-in support for all I/O including the data acquisition features. A GUI provides convenient real-time control of the data acquisition I/O

Mass storage

Jethro contains an M.2 2242 size socket for the addition of up to 256GB of additional SATA-based mass storage. A micro-SD socket is also provided.

Expansion capabilities

A PCIe MiniCard socket enables the installation of additional I/O to meet the needs of diverse applications. A modem socket on Jethro enables the installation of cost-effective and pre-approved Nimbelink™ Skywire® cellular modems featuring a range of global cellular standards.

Specification

Adapter/Carrier

FeaturesFor Jetson TX2/TX21 modules
Connections2x 4-channel CSI camera inputs
1x 10/100/1000 Ethernet
1x USB 3.0 + 2x USB 2.0
1x HDMI
2x RS-232
6x analog inputs, 12-bit resolution, 0-3.3V output range, up to 1Msps throughput
2x analog outputs, 12-bit resolution, 0-3.3V output range
12x digital I/O, 3.3V logic levels
1x PCIe MiniCard expansion socket with USB
1x M.2 2242 SATA socket for SSD up to 256GB
1x Micro-SD socket
1x Nimbelink™ Skywire® modem socket
Latching connectors for all I/O for increased ruggedness

General

ElectricalInput voltage: 9-18VDC (with TX2 installed)
Input voltage: 5.5-18VDC (with TX2i installed)
Mechanical107mm x 76mm / 4.2" x 3.0"
SoftwareN/A
TemperatureTemperature range (operation): -40 to +85°C
Temperature range (storage): -40 to +85°C
Warranty2 Years
RoHSCompliant

Ordering Details

Board ZIG-001
Ziggy carrier board for Jetson TX2/TX2i computer on module (module and heat sink / fan sink not included)
AccessoriesN/A