This convenient adapter board allows users to install either a PCIe/104 or a PCI/104-Express card into a standard PCI Express system slot.
The adapter features both a PCIe/104 and a PCI-104 connector. The passive PCI-104 connector has all critical PCI input signals tied off to safe levels to avoid damaging a dual-bus card, while at the same time provides extra mechanical stability for PCI/104-Express cards.
This adapter supports any x1 lane PCI/104-Express or PCIe/104 add-in card. Simply mount the add-in card to the adapter and install the adapter in a PCI Express slot. Most PCI/104-Express and PCIe/104 cards will require the connection of an IDE power cable to the P3 connector on the card. This cable provides the 5V rail to the add-in card.
Once everything is connected, you may begin using the add-in card just as you would any other PCI Express add-in card. No additional configuration is required.
|Features||PCIe/104 and PCI/104-Express compatible|
Industrial temperature range of -40º C to 85º C
PCIe/104 156 pin connector
PCI-104 120 pin connector
+5V input for PCIe/104 add-in card
x1 lane PCI Express card edge allows installation in any slot width
Complies with PCI Express 1.1 electromechanical requirements
|Expansion||x1 lane PCI Express card|
|Electrical||N/A (power for I/O board comes via PCIe interface (12V) or separate power connector (5V)|
|Mechanical||4.050” wide by 4.375” tall|
|Conformal Coating||On request|
|Temperature||Temperature range (operation): -40°C to +85°C |
Temperature range (storage): -40°C to +85°C
PCI Express to PCIe/104 Adapter