Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk SATADOM-ML 3IS4 - SATA Disk On Module MLC SSD

Up to 128GB Capacities, up to 540MB/s Read, up to 400MB/s Write

Introduction

Innodisk SATADOM-ML 3IS4 is characterised by L3 architecture with the latest SATA III (6.0GHz) Marvell NAND controller. Innodisk’s exclusive L3 architecture is L2 architecture multiplied LDPC (Low-Density Parity-Check). L2 (Long Life) architecture is a 4K mapping algorithm that reduces WAF and features a real-time wear leveling algorithm to provide high performance and prolong lifespan with exceptional reliability.

Innodisk SATADOM-ML 3IS4 is designed for server field. The high of the SATADOM suit for 1U(44.5mm) high server, allow it to fit seamlessly into any server setup. Besides, the main benefit is going to be the ability to use a SATA boot device without using a drive bay.

The innovative Pin8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on customer’s system without an additional power cable. Besides, the booting time for operation and the power consumption is less than hard disk drive (HDD) and can work under harsh environment compile with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.

Specification

Storage Specification

Model InfoSATADOM-ML 3IS4 Server Boot-Up Drive
Flash TypeiSLC
InterfaceSATA III 6.0 Gb/s
Connector Standard 7 pin SATA
Capacity32GB to 128GB
Channels2
PerformanceSequential R/W (MB/sec, max.): 540/400
Thermal SensorYes
H/W Write ProtectYes
DRAM BufferNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical0.815W (5V x 163mA)

Power - choice of:
• Power applied via pin 8 or external two pin power connector (cable included), part number ends in A
• Power applied via pin 7 or pin 8 methods (motherboard support required), part number ends in B
Mechanical36.7 x 31.2 x 10.7 mm
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty5 Years
RoHSCompliant

Ordering Details

BoardSATADOM-ML 3IS4 Pin7+Pin8 supported (Enterprise, Standard Grade, 0 to +70°:C)
DSSML-16GM413CADCB 16GB SATADOM-ML 3IS4 (Pin8+Pin7), iSLC flash, 2 channels, 500 MB/s (read), 170 MB/s (write)
DSSML-32GM413CADCB 32GB SATADOM-ML 3IS4 (Pin8+Pin7), iSLC flash, 2 channels, 530 MB/s (read), 320 MB/s (write)
DSSML-64GM413CADCB 64GB SATADOM-ML 3IS4 (Pin8+Pin7), iSLC flash, 2 channels, 530 MB/s (read), 360 MB/s (write)
DSSML-A28M413CADCB 128GB SATADOM-ML 3IS4 (Pin8+Pin7), iSLC flash, 2 channels, 540 MB/s (read), 400 MB/s (write)

SATADOM-ML 3IS4 Standard and Pin8 VCC(Enterprise, Standard Grade, 0 to +70°:C)
DSSML-16GM413CADCA 16GB SATADOM-ML 3IS4 (Pin8+Cable), iSLC flash, 2 channels, 500 MB/s (read), 170 MB/s (write)
DSSML-32GM413CADCA 32GB SATADOM-ML 3IS4 (Pin8+Cable), iSLC flash, 2 channels, 530 MB/s (read), 320 MB/s (write)
DSSML-64GM413CADCA 64GB SATADOM-ML 3IS4 (Pin8+Cable), iSLC flash, 2 channels, 530 MB/s (read), 360 MB/s (write)
DSSML-A28M413CADCA 128GB SATADOM-ML 3IS4 (Pin8+Cable), iSLC flash, 2 channels, 540 MB/s (read), 400 MB/s (write)
AccessoriesN/A