Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk SATADOM-SV 3SE4 - SATA Disk On Module SLC SSD

Up to 32GB Capacities, up to 520MB/s Read, up to 260MB/s Write

Introduction

Innodisk SATADOM-SV 3SE4 is characterized by L³  architecture with Marvell NAND controller and SLC NAND Flash. Innodisk’s exclusive L³  architecture is L² architecture multiplied LDPC (Low Density Parity Check). L²  (Long Life) architecture is a 4K mapping algorithm that reduces WAF and features a real-time wear leveling algorithm to provide excellent performance and prolong lifespan with exceptional reliability.

Innodisk SATADOM-SV 3SE4 is designed for industrial field, and supports several standard features, including TRIM, NCQ, and S.M.A.R.T. In addition, Innodisk’s exclusive industrial-oriented firmware provides a flexible customization service, making it perfect for a variety of industrial applications.

The innovative Pin 8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on customer’s system without additional power cable. Besides, the booting time for operation and the power consumption is less than hard disk drive (HDD), and can work under harsh environment compile with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage.

Specification

Storage Specification

Model InfoSATADOM-SV 3SE4
Flash TypeSLC
InterfaceSATA III 6.0 Gb/s
Connector Standard 7 pin SATA
Pin 7, pin 8 or external connector power options
Capacity4GB to 32GB
Channels2
PerformanceSequential R/W (MB/sec, max.): 520/260
Thermal SensorYes
H/W Write ProtectNo
DRAM BufferNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical1.58W (5V x 315mA)

Power - choice of:
• Power applied via pin 8 or external two pin power connector (cable included), part number ends in A
• Power applied via pin 7 or pin 8 methods (motherboard support required), part number ends in B
Mechanical40.4 x 21.03 x 10.4 mm
Conformal CoatingAvailable on request - contact us for details
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty5 Years
RoHSCompliant

Ordering Details

BoardSATADOM-SV 3SE4 with Pin8 VCC Supported and power cable (Industrial, Standard Grade, 0 to +70°:C)
DESSV-08GM41SCADBA 8GB SATADOM-SV 3SE4, SLC flash, 2 channels, 375 MB/s (read), 75 MB/s (write)
DESSV-16GM41SCADBA 16GB SATADOM-SV 3SE4, SLC flash, 2 channels, 520 MB/s (read), 150 MB/s (write)
DESSV-32GM41SCADBA 32GB SATADOM-SV 3SE4, SLC flash, 2 channels, 520 MB/s (read), 260 MB/s (write)

SATADOM-SV 3SE4 with Pin8 VCC Supported and power cable (Industrial, W&T Grade, -40 to 85°C)
DESSV-08GM41SWADBA 8GB SATADOM-SV 3SE4, SLC flash, 2 channels, 375 MB/s (read), 75 MB/s (write)
DESSV-16GM41SWADBA 16GB SATADOM-SV 3SE4, SLC flash, 2 channels, 520 MB/s (read), 150 MB/s (write)
DESSV-32GM41SWADBA 32GB SATADOM-SV 3SE4, SLC flash, 2 channels, 520 MB/s (read), 260 MB/s (write)

SATADOM-SV 3SE4 with Pin7 & Pin8 VCC Supported (Industrial, Standard Grade, 0 to +70°:C)
DESSV-08GM41SCADBB 8GB SATADOM-SV 3SE4, SLC flash, 2 channels, 375 MB/s (read), 75 MB/s (write)
DESSV-16GM41SCADBB 16GB SATADOM-SV 3SE4, SLC flash, 2 channels, 520 MB/s (read), 150 MB/s (write)
DESSV-32GM41SCADBB 32GB SATADOM-SV 3SE4, SLC flash, 2 channels, 520 MB/s (read), 260 MB/s (write)

SATADOM-SV 3SE4 with Pin7 & Pin8 VCC Supported and power cable (Industrial, W&T Grade, -40 to 85°C)
DESSV-08GM41SWADBB 8GB SATADOM-SV 3SE4, SLC flash, 2 channels, 375 MB/s (read), 75 MB/s (write)
DESSV-16GM41SWADBB 16GB SATADOM-SV 3SE4, SLC flash, 2 channels, 520 MB/s (read), 150 MB/s (write)
DESSV-32GM41SWADBB 32GB SATADOM-SV 3SE4, SLC flash, 2 channels, 520 MB/s (read), 260 MB/s (write)
AccessoriesN/A